Ferro-Bet Alu-Clean 25 l

Varenummer: 260022

Ferro-Bet Alu-Clean

Removes oxidation on aluminium, polished steel and other metals that oxidises. Removes impurities on the surface of aluminium and provides better adhesion for finishing products.

The product is especially suitable for removing brake dust or air born metal particles on aluminium rims.

1 l Ferro-Bet Alu-Clean, covers about 7-8 sqm.

Available in: 1 l, 5 l, 25 l, 200 l and 1000 l IBC

Se vanlige spørsmål og svar her

Category:

Removes oxidation on aluminium, polished steel and other metals that oxidises. Removes impurities on the surface of aluminium and provides better adhesion for finishing products.

1 l Ferro-Bet Alu-Clean, covers about 7-8 sqm.

INSTRUCTIONS

Remove brake dust: Do not apply Ferro-Bet Alu-Clean to warm rims. Ferro-Bet Alu-Clean is ready for use. If you are afraid that Ferro-Bet Alu-Clean is too strong, it can be diluted 1:10 with water. Apply generously, use a brush to remove stubborn brake dust.

Acting time: 10-30 seconds

Rinse with plenty of water. Repeat the process if needed.

If the rim is damaged, do not use Ferro-Bet Alu-Clean as it might be too strong.

Cleaning of Aluminium plates, constructions, support arms, step plates, cross-sections, aluminium boats etc. The product removes the oxidisation that is emitted by for example aluminum. Apply the product on the problem area, let Ferro-Bet Alu-Clean work for 2-5 minutes. If needed, work the area with a stiff brush. When the desired result is achieved, rinse off with water. Avoid spillage on paint or painted surfaces.

In case of spillage, rinse immediately with fresh water.

Prepare aluminium before coating: Spray on the area or apply with cloth. Let it work for 2 minutes. If there is heavy contamination on the surface of the aluminium, you can leave the product for longer, but no longer than 5 minutes.

Rinse of with fresh water or wipe down the area with a wet cloth. Always use plenty of water to rinse after using Ferro-Bet Alu-Clean.

Use Duration
Wheel 10-30 seconds
General use 2-5 minutes. Use a brush (repeat if needed).
Preparation before coating or varnish 5-15 minutesr. Apply with cloth.
Tilgjengelig 1 l, 5 l, 25 l, 200 l, og 1000 l IBC